Posted by Paul(in NY) [12.64.108.106] on Saturday, October 09, 2010 at 14:09:19 :
In Reply to: Re: Coating inside of axle housings posted by terry [74.15.33.241] on Saturday, October 09, 2010 at 13:22:49 :
No advice here, nor do I know if it worked and did not release after contact with hot gear lube. Since I assembled the axle housings, I have NOT opened them. I have no idea of the epoxy condition inside.
However, knowing how tough the PPG Epoxy is, I have high confidence that all is well.
I just wanted to share what I did.
Paul