|
|
Posted by 64w200crewcab [69.96.74.151] on Wednesday, September 15, 2010 at 22:58:38 :
In Reply to: Re: cummins sae#3 flywheel housing wanted posted by Milo in Pa [71.116.18.92] on Wednesday, September 15, 2010 at 22:27:37 :
Wow. good eye!!! Looks like it has the needed side tabs, but see how this add is incomplete without the cummins part number that is cast on the bell housing itself, if one has the cummins part number that is cast on the bell it can be looked up, problem is without the part number from cummins on the bell to crossreference its their guess or word as to what size this bell is, it could be 13 or 14 inch real easy, the 14 sae#2 wont fit in my swap plans. This bell looks to use the starter at the right side 3 o"clock position, same as the 5.9 and 3.9, its prob the correct bell but who wants to gamble, sellers never post a picture of the bell with a ruler across it and the part number showing so one can be sure, thanks for posting this pic, i been looking and not seen a Sae#3 bell with the side tabs like this. Problem is its available new frm Agro/White and cummins for $1000 and 60 day backorder right now for the correct one with guarantee it fits. If this bell is actually an SAe#3 one could use a Spicer 3053a 5 speed out of a M35 to bolt it up in a Powerwagon without the custom adapter sae#2 to Sae#3 that costs $500 from Phoenix Casting, i got one se up like that right now and it makes the tswap too expensive. Thanks for the heads up, will email the guy for better pics with a ruler and p/n showing to id it.