Need room for the arm on the motor to swing 360°...

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chriscase [76.212.214.182] on Saturday, September 04, 2010 at 22:52:17 :

In Reply to: Anyone ever tried this type of wiper set up posted by Adam [98.151.192.28] on Saturday, September 04, 2010 at 22:04:53 :

Plus, you have to be able to install it all inside the header. Those circlips on the shaft levers would be impossible. Plus, the shafts are not paralell on Dodges. You would probably want to remove the circlip stubs, and replace with ball joints on the other surface. Then. things get tight for the other actuator rod from motor to shaft lever.

I wonder if you could put the motor off to one side, instead of centered?

/bigchriscase/powerwagonwipersystem

Follow Ups:

Chris, a few questions - Adam 23:26:31 09/04/2010

Re: Chris, a few questions - Chriscase 00:39:31 09/05/2010

Re: Need room for the arm on the motor to swing 360°... - Adam 23:02:22 09/04/2010

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com