|
|
Posted by Daryl in Oz [210.50.143.20] on Wednesday, July 21, 2010 at 05:28:51 :
In Reply to: Re: Cams posted by clueless [201.202.22.114] on Tuesday, July 20, 2010 at 19:30:39 :
Milling the top of the block so it is 100% parallel to the crank is fixing the deck height - just about mandatory in performance motors and often a first step in blueprinting an engine. We used to machine the heads so there was about 1mm clearance above the open valves when measured without a head gasket.