|
|
Posted by Tim Holloway [69.54.28.229] on Sunday, June 27, 2010 at 07:05:29 :
In Reply to: Removing Manifold Bolts posted by Don in Portland [24.22.121.187] on Sunday, June 27, 2010 at 01:53:33 :
Don,
Those ones that only the bolt heads visible can be mutha's Irwin makes a bolt head extractor that is reasonably priced, it grips the head tighter as you turn it. It is about the only way I have been able to get a lot of them off. Dont forget there is another stud up under the maniflod, in the center and oly visible from below. Another fun one.
Not sure about shooting the PB down the head bolt hole.
Good luck,
Tim