|
|
Posted by Keith in Washington [24.41.41.111] on Monday, June 21, 2010 at 20:09:28 :
In Reply to: Re: Clint: Question on bed wood. posted by Clint Dixon [65.125.107.130] on Monday, June 21, 2010 at 07:13:00 :
Some of my boards are warped. Only 1 joint is really bad. Both boards on that joint warped upwards. I have a couple that are about an inch wide. I do have some rot at the front edges of a couple of boards. I also have a few cut outs where they ran some pipes up through the floor for the fire pumps. I have though about splicing pieces into these holes and making a few other minor repairs. I just put 3 coats of 50% linseed oil and 50% mineral spirits on the boards as they were so dry. It seemed to help a lot. I will hit it again before long.
Follow Ups: