Re: m37 transfer case

Posted by Kaegi [71.227.129.92] on Wednesday, May 19, 2010 at 14:32:14 :

In Reply to: Re: m37 transfer case posted by D Sherman [24.32.202.83] on Wednesday, May 19, 2010 at 14:27:53 :

the ratios do not change at the lower out puts. in high range you are in 1 to 1 direct drive at all 3 outpits, and in low range all 3 outputs are at 1.96 to 1 underdrive. the NP200 was first used in the WC62/63 6x6 which utilized all three outputs. I dont know if the M37 drivshaft yoke will fit on the ebrake drum or not. you might be able to find one that will at a driveline shop. bring the yokes with you.

Follow Ups:

• Good info. - D Sherman 14:41:11 05/19/2010
  • Re: Good info. - Kaegi 16:18:20 05/19/2010
    • Also - Kaegi 16:25:47 05/19/2010
      • Makes a good gear splitter - David 18:46:17 05/19/2010
        • Sounds risky - D Sherman 19:58:00 05/19/2010
          • However - clueless 16:45:26 05/20/2010
  • Re: Good info. - Paul(in NY) 15:20:31 05/19/2010
    • Re: Good info. - vince konicki 21:22:45 05/19/2010
      • Vince Remember - Paul(in NY) 21:36:08 05/19/2010
        • Re: Vince Remember - vince konicki 06:37:50 05/20/2010

Post a Followup