Uppholstery suppliers. " Waterproof Backer Board"


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chriscase [76.212.163.231] on Thursday, March 11, 2010 at 09:52:26 :

In Reply to: headliner posted by loyd [70.41.130.54] on Wednesday, March 10, 2010 at 23:33:52 :

Comes in black only, you need to use spray adhesive to glue on a layer of light weight vinyl. Us 'hi temp headliner spray'. If you use regualr vinyl instead of the perforated faom backed stuff, it lasts longer. And use it to cover door panels, kick panels, visors...

pic is of this type. see also #48 on that page

Or, weld in some tabs with holes in them, spring in some looong 3/16" rods, and do a suspended headliner. Headliner needs to be sewn though. pic at <http://imageevent.com/bigchriscase/fivewindowmodification?z=2&c=3&n=1&m=16&w=4&x=0&p=9> is my first attempt at a suspended ceiling, after my five window mod. It's been redone. Next one came out much better, need new pic. I had to cut the rearest section at a curve and sew it to the rest at the rear spring rod. Plus, it has a pair of small coil springs from rear rod to tabs welded to my 'shoulder harness loop' of 1 1/4" heavy walled square tubing. I think they only hold the rest snug until the rear section gets glued. I used yellow weatherstrip cement, you need some long tack time to pull the vinyl tight, stick it down, come back and unstick it for adjustments, get all the wrinkles out, repeat as needed.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com