Re: Bent disc might have a funny feel to it.

Posted by Chris & Carston Becker [71.20.194.224] on Monday, March 08, 2010 at 15:13:07 :

In Reply to: Re: Bent disc might have a funny feel to it. posted by Keith in Washington [24.41.41.111] on Monday, March 08, 2010 at 14:46:54 :

Yes it did.

Keith do you have a way of checking NAPA part numbers? Vicky our local counter gal (helps to have a old truck nut behind the counter!) had to really search for to find them before I order them.

part numbers for: clutch disk RCF446
pressure plate CA519/ca592

I don't have the throwout bearing numbers and pilot bushing number. (pilot bushing was wrong and needed to be reamed out between 1\64 and 1\32 of an inch)

Both of which are now discontinued and not available from NAPA (I bought them before I knew about Vintage Power Wagons) I compared all the parts and everything looked visually the same (except pilot bushing which needed to be reamed as stated above)

Chris Becker

Follow Ups:

• Bushing too tight, input shaft jammed? - Chriscase 18:21:34 03/08/2010
  • Re: Bushing too tight, input shaft jammed? - Chris & Carston Becker 19:01:30 03/08/2010
    • Re: Bushing too tight, input shaft jammed? - Chris & Carston Becker 19:13:06 03/08/2010
      • Sounds like sound machine shop practice to me. - Chriscase 21:00:26 03/08/2010
        • Ditto on that.........ntxt - Paul ( in NY) 21:20:24 03/08/2010

Post a Followup