Re: Hanging Pedals/6X6 project


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Bob in Illinois [76.16.9.188] on Friday, March 05, 2010 at 17:32:54 :

In Reply to: Hanging Pedals/6X6 project posted by John Vietti [69.144.190.102] on Friday, March 05, 2010 at 12:30:46 :

I used one of Ray's kits as well but modified it quite a bit. I reinforced the engine side of the firewall with a 1/4" plate that goes from the upper lip of the firewall down to where the angle part of the floor ties in. Then from the outside edge to about where the gas pedal rod opening is. I installed Ray's deal as he instructed. I had to reconfigure the pedal geometry a whole bunch because I extended the doghouse to accomodate the 6BT. The brake and clutch pedal now share realestate with the accelerator pedal. I will attempt to post pictures tonight.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com