Big clutches are hard. And bent disc?

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chriscase [76.212.161.125] on Friday, November 27, 2009 at 14:53:58 :

In Reply to: Clutch Pressure posted by frostysnoman [198.178.8.81] on Friday, November 27, 2009 at 13:44:46 :

It's very easy to bend the disc when installing the tranny. If you dropped it or let it hang after the input was into the disc hub, you may have bent it. The pressure plate will squash it flat, but it will rub enough when pedal it down to never disengage.

But are you sure you have it adjusted properly? You might try going why too far, see if that allows release. Then back it back off until you have some free play.

Follow Ups:

Re: Big clutches are hard. And bent disc? - Paul ( in NY) 16:02:25 11/27/2009

Oh, to prevent bending the disc, use looong studs. - Chriscase 14:56:31 11/27/2009

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com