Re: Garwood winch Model CA514-305166


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Ron Hardin [71.231.105.225] on Thursday, November 05, 2009 at 17:39:11 :

In Reply to: Re: Garwood winch Model CA514-305166 posted by David Sherman [216.18.131.82] on Thursday, November 05, 2009 at 16:41:15 :

David, you are right on. The brackets that bolt to the ends and then were welded to the frame, so that is where it is going to stay. As you said the top, u-shaped plate was mangled and I'm replacing it with a 1/4" x 4 1/2" steel flat. The bottom 3/4" bolt was worn thru about half way and I've replaced it and made a 3/4" pipe sleeve to act as a roller. I've been able to remove all but one plug. Now I'll replace the cable, add Corn Head grease and should be in business. I can move the drum lock in and out but is it supposed to be spring loaded?
Thanks again for the help,
Ron



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com