|
|
Posted by copey [206.80.248.177] on Tuesday, November 03, 2009 at 20:03:53 :
In Reply to: Good advice posted by David [76.103.64.254] on Tuesday, November 03, 2009 at 10:56:11 :
when i grease my pins/bushings i lift the body up by a jack all (not by the axles) when you take the weight off the springs and bushings > grease will go into the bushings easier and get all around the pins/bushing makes a better job because a spring and shackle have a limited travel so you are prone to wear ? in the limited range of motion and it gives you a oppertunity look at the pins/bushings for wear slopp ect ~ Copey ps i think i used the right wear word where it should be grammor