|
|
Posted by Paul ( in NY) [12.64.158.71] on Thursday, September 17, 2009 at 22:20:53 :
In Reply to: Re: disc brakes or restore original brakes posted by lakelanierpwrwgn [66.168.205.229] on Thursday, September 17, 2009 at 22:04:35 :
I will make the list of needed parts, ie;
Calipers, rotors, pads, caliper pins along wiht the prices I paid on the last conversion and email it to you.
The master cylinder can be left on the in the stock location. However, the Master Cylinder should be changed to a dual chamber system and with a bore of 1 & 5/16". The dual chambers are for safety. One chamber powers the front brakes, the other chamber powers the rear brakes. If you had a catastrophic
failure on the front or back brakes, the other unaffected would still provide braking.
Go to the first page of the forum, click on links. Browse down the list for Ken & Linda.
They have some nice photos and descriptions of the Master Cylinder mounting .
Paul
Follow Ups: