weld nuts to the screw face


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by mannyc on Saturday, July 25, 2009 at 20:39:22 :

In Reply to: Re: brake question ? posted by Jerry in Idaho on Saturday, July 25, 2009 at 18:49:21 :

weld a nut to the offending screws. gives you something to put a socket on and the heat from the weld breaks the rust. they are buggered already, dont waste time on them. reinstall new ones with antiseeze. allen type are good, but the slotted ones are ok if you buy a drag link socket and grind it for a perfect fit. then use a hand impact tool and a hammer to break free in the future if they get stuck. antiseize is your friend/



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com