|
|
Posted by frostysnoman on Wednesday, July 22, 2009 at 11:21:31 :
In Reply to: Re: Transfer Case Yoke press posted by Ty on Monday, July 20, 2009 at 22:15:05 :
I got it most of the way on... I think it’s just slightly different. A little grease, a little elbow grease, and a little persuasion by a heavy piece of wood and metal. The engine/tranny spacing was a little off, so I have to move the mounts forward about 1 in to get the (REALLY REALLY) expensive munchkin drive shaft in there. So I might be selling some parts to try and re-coop this blow….. Anybody interested in a 251 that I replaced a majority of the external components on, but then it seized on me in the mountains, or a passenger door, or a transmission?