Re: front fender question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Kevin in Ohio on Saturday, July 18, 2009 at 15:29:53 :

In Reply to: front fender question posted by Tim on Saturday, July 18, 2009 at 14:52:28 :

On the '41 WC's they are spot welded as well and I'd bet the Power Wagons too. Depends on who did it on the line as to how many they'll be. Usually about 1/2- 1 inch in every 1 to 2 inches.

You can usually find them by running a flat sanding block over the area and they'll show up as tiny lows. If your going to replace it, run a large angle grinder disc as flat as possible. That is if it ian't too rusty as you say yours is.

I used a carbide endmill to grind away the plate side of the spot as I was trashing it and had no damage to the lower piece that way.

If you need pics let me know, Kevin



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com