Re: Vintage Wiring vs. Roberts

Posted by Paul (in NY) on Friday, July 10, 2009 at 08:15:05 :

In Reply to: Re: Vintage Wiring vs. Roberts posted by bill in pa on Friday, July 10, 2009 at 07:31:04 :

Like Bill, I make my own wire harness. The last one I did was for the M37. It had lots of extras you would not want. Total cost including all wire in split loom, 12 circuit fuse panel, breakers on some heavy draw circuits and a magnetic contactor controlling (as used on current pickups) the power cost me $475.00. All parts were boght at NAPA. If your interested, I can share part numbers etc and give some tips. I wire all my trucks from scratch. As Bill says, its not hard.

Paul

• Restoration Alley

Follow Ups:

• Thanks Paul, that might give me the.... - Nick 11:16:35 07/10/2009
• modern vs repro - mannyc 10:51:07 07/10/2009
  • Re: modern vs repro - Dan in CO 11:06:59 07/10/2009
    • Re: modern vs repro - Nick 11:24:36 07/10/2009
      • Re: modern vs repro - Dan in CO 17:55:38 07/10/2009
        • Re: modern vs repro - Nick 21:18:47 07/10/2009
    • Ok, now that is sweet.. - Nick 11:19:05 07/10/2009
      • Re: Ok, now that is sweet.. - mannyc 14:39:59 07/10/2009

Post a Followup