Re: Replacing drag link ends, Help!

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Paul (in NY) on Thursday, July 02, 2009 at 12:24:49 :

In Reply to: Replacing drag link ends, Help! posted by JBell in S. Illinois on Thursday, July 02, 2009 at 10:29:24 :

Assemble the drag link end's in the same order as they were removed. Just start the threads on the plugs on each end. The drag link ends are now fully open, slide the drag link ends over the ball's. Then tighten the plug on each end of the drag link fully. Then back off the plug to the (FIRST) set of holes that will allow the cotter pin's to be inserted.

Paul

Restoration Alley

Follow Ups:

Duh!, just figured it out! - JBell in S. Illinois 12:38:58 07/02/2009

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com