Posted by Rick Larsen on September 27, 2000 at 13:24:31:
In Reply to: Brake backing plates posted by Rick C on September 27, 2000 at 08:49:31:
Had to do 4! It was a real BI@TCH! had to chisel the heads off and then drill out the rivet with ever increasing drills, air drill worked the best, electric was too slow.
Do not drill all the way through, you have to leave enough so that you can drive it out with a punch.
Used grade 8 nuts and bolts to mount the new plates (ABLinn).
spent about an hour per plate.
Good Luck!!!!!!!!!!!!
Rick