Re: Wire Rope 7/16 clamp


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Milo /in/ Pa on Tuesday, June 02, 2009 at 09:32:46 :

In Reply to: Wire Rope 7/16 clamp posted by Milo /in/ Pa on Thursday, May 28, 2009 at 18:30:42 :

Thanks for the input. I juat took the 3/8 esmet safe line clamp and a piece of 7/16 fibre core wire rope to the machinest and the next day he had a fellow from a rigging company come into his shop while he was starting to work on the clamp. He said wait a minute that 3/8 clamp will work on 7/16 wire rope that has fiber core because it will compress down. So he brought it to me after he and the rigger put it togeather It lookeg great and the rigger said that it would be better this way and hold stronger than a 7/16 clamp. So I took it apart and installed it on my winch cable It was a hard job for one person to do this but I finally got it togeather and tightenen up while holding it in the vice and using a wrench with a 4 foot pipe attached to it. All this searching for this elusive 7/16 esmet clamp and I dident even need one.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com