|
|
Posted by Dave K. Royal on Tuesday, May 26, 2009 at 18:22:56 :
In Reply to: Re: Michelin tire pressures posted by Tim Holloway on Tuesday, May 26, 2009 at 16:27:26 :
I'm with tim ! there is'nt a set in stone air pressure to run on any truck!! you set the air at a certain pressure and then put about a thousand lbs in the bed, guess what? then you have to refigure it all again!! way,way to much solution for a extremely simple problem. put air in the tire until its good and hard. let air back out until there is only about 3/8's of an inch of the tread off the ground on the outside of the tire. then check the pressure and match to the other side. front to back will be differnt, most of the time about 5 to 10 lbs. I run 40 in the front of my truck and 30 in the back. I've had 4000lbs in the truck and the tire still looked normal. softer tires in the back will make the truck ride so much better you won't beleive it ! 58 ffpw Dave
Follow Ups: