|
|
Posted by Joe Cimoch on Friday, March 13, 2009 at 18:57:08 :
In Reply to: cowl lights posted by TooTall on Friday, March 13, 2009 at 09:42:56 :
Dallas Meek supplied these dimensions to me a long time ago:
Wish I had a scanner, but here are the measurements
off of 51 cab. From body seam below lights, holes
are 1 1/2" (seam to center). From edge of door, rear
hole is 3 9/16" to center, center hole is 4 3/4"
to center, and front hole is 5 1/2" to center.
Front and rear holes are 1/4" and center hole is
1/2". Make a template with a piece of matboard or
equivalent and compare to hole and studs on cowl
light cups.
Hope this is some help to you.
-Dallas
Follow Ups: