|
|
Posted by dank and wet coast bruce on Thursday, December 11, 2008 at 10:52:35 :
In Reply to: Flat tow hazard posted by Bob in N. Ga. on Thursday, December 11, 2008 at 10:44:15 :
You could stick in some 5 degree shims between the spring perches and axles and pop them back out ounce you got there . As long as you have a tight front end , a bit of toe in AND the axle tilts back 5- 9 degrees the vehicle will self center .
And the rear axle needs to be straight too .
and the tire pressure should be the same on all four tires
and the tires should all be the same diameter
and the brakes all need to be in the same adjustment and the steering needs to be hooked up
and the guy towing needs a brain .
Follow Ups: