Re: Put another handle on the outside....


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Keith in Washington on Wednesday, November 19, 2008 at 17:18:05 :

In Reply to: Re: Put another handle on the outside.... posted by Steve K. CALIF on Wednesday, November 19, 2008 at 16:33:45 :

The outside handles remove with the two screws that are visible on the outside. Once the screws are out, it may be hard to pull out as the shaft may be rusted to the latch mechanism inside the door. I had to drill the heads off the 2 screws that hold the handle on. I was then able to use my fingers to remove the left over screw as it was the screw heads that were rusted/stuck to the door handle

The inside handles are removed by pushing the escussion in the door handle towards the door. Push it as far inward (towards the door) as possible. Hold it there. Now look for one of the 2 holes in the part of the door handle that you just uncovered and it has a small metal pin in it. Push the pin out and the door handle will come off. Some door handles have 4 holes but you will only have 1 pin. Each set of holes on opposite sides of the handle allows for a pin.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com