318/360 identification.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Caleb (Kansas City) on Tuesday, November 18, 2008 at 20:48:35 :

I looked through the archives and I can't find an answer. I parted out what I thought was an '85 Dodge 150 with a 360 with a buddy, but after we started to pull the motor I thought that there were way too many wires so I pulled off the air cleaner and discovered an EFI throttle body....we looked at all of the places the manual says. There is a 318#### on the driver side of the block and the date stamp ( I assume) was 12-22-87. The Id pad on the pass. side midblock just above the oil pan is blank. After a little registration searching, we know that the cab was an '85 2wd. the frame was an '89 4wd, and maybe the motor was an '89. This was a frankenDOdge with a Nebraska builders title (reg. says the make is Dodge89 and the year is '93). Any other ways to ID the motor? manual says the 318 was the only EFI motor in '87.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com