|
|
Posted by mike Stone on Wednesday, September 03, 2008 at 10:19:39 :
In Reply to: Fixing my missin truck & advise on how the best way to d posted by Chris and Carston Becker on Tuesday, September 02, 2008 at 22:17:06 :
you might want to run a bottom tap thru all
the bolt holes in the block and also clean the threads up on all the bolts so you can get an even torque when you re-install the
head
I also used copper anti-sieze on all the bolt threads when i replaced the head & gasket on
our 48