Posted by dave horvath on August 28, 2000 at 16:40:00:
In Reply to: PW-restoring posted by Jürg Tschepen on August 26, 2000 at 17:38:38:
If it is frozen, you should spray the three slotted head retaining screws liberally with penetrating oil. PB Blaster works well. Then use an impact wrench (I use a hand held one and hit it with a small sledge). You may have to use heat. After you get the three screws out, you need to drive in three 3/8" cap screws in the other visible holes. These work against the hub to removw the drum. You may need to adjust the cams at the heel of each shoe to release the brakes. You may also need to pry the drum from behind or strike it with a piece of hardwood. Keep trying, you'll get it off!