|
|
Posted by chuck on Monday, July 28, 2008 at 20:18:21 :
In Reply to: Re: manifold question 251 motor posted by Ken See on Monday, July 28, 2008 at 19:47:41 :
well if these bolts are threaded into the bottom half "front two wasn't" and then an added nut on the bottom of stud. Then I really screwed up because after I got the 2 front ones loose I figured what the heck I will cut the head off and drive it out the bottom. this was after I couldn't get it loose with an impact and heat. But if it is threaded into the bottom half it aint going to drive through like I thought. now I guess I am going to have to drill it out far enough to eliminate the 1/2 inch or so of threads to get it out. what a MESS !! I have the manifold off and in my bench vise so I can try and drill it. any other suggestions ? I will take a pic and see if i can post what it lookes like.
Follow Ups: