Re: MU-2 rebuild


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dave in Idaho on Friday, May 09, 2008 at 01:57:48 :

In Reply to: MU-2 rebuild posted by Mark on Thursday, May 08, 2008 at 21:21:49 :

I'm in the same process with my MU-2. I assume you are talking about the Wench safety brake drum on the end of the wench worm shaft. The drum is keyed to the shaft with a woodruff key ( semicircular). I pulled out the square head set screw and sprayed some penetrating oil in the hole and lightly tapped the drum face all the way around with a copper faced hammer. Using big screw drivers between the inside edge of the drum and the seal and bearing housing I managed to work it off. Hope this helps.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com