Re: HEI help


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Mike C. on Saturday, March 22, 2008 at 11:41:15 :

In Reply to: Re: HEI help posted by Kevin in Rehoboth on Friday, March 21, 2008 at 18:17:31 :

I learned about the odd-even thing and thats not the problem but after watching the pully with the timing light, the centrifugal advance seems to be totally non-working. I had a lengthy discussion at Napa and since I moved the oil pump 90 degrees to allign my wires on the cap where I wanted them, did that screw up fireing allignment since it is an hei and 6 cyl (based on 120 degrees) ? I reset the dist (oil pump) to original spot and it runs ok with vacuum advance attached but will hardly come off idle with v.a. disconnected. Timing light shows cent. advance to be screwed up. Car Quest is checking to get a kit, Napa doesn't have it. I'll keep you posted

Mike C.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com