|
|
Posted by Willy-N on Sunday, February 03, 2008 at 23:07:08 :
In Reply to: Re: Mark posted by Paul (in NY) on Sunday, February 03, 2008 at 22:53:48 :
The industrial engine was perfect allready set up with a double "C" Belt Pulley out the rear. Its max HP was at 2400 rpms so I belted it down to run at 1350 rpms and the engine just purrs along. I only needed 50+ HP for 35 KW and the engine had a max of 105HP @ 2400 rpms so it was a match. It was allready set up as a staionary power plant on it's own frame, radiator, extra oil & water capasity. It even had hose extentions on the oil and water drains so you could drain it into a bucket away from the engine. The air filter was oversized and the radiator had a built in shroud. The govenor I adjusted it to maintain the rpms so it was a good match. Gasoline run engine was nice cause it does not need to be heated to start in the winter. It also had a 60 gal fuel tank on a stand to supply it with. Mark H.
Follow Ups: