|
|
Posted by Terry in Bozrah on Wednesday, January 02, 2008 at 20:52:46 :
In Reply to: Re: Cold tappet adjusting posted by dave horvath on Wednesday, January 02, 2008 at 20:30:23 :
Dave
This is from the P15-D24 site and are set HOT.
For cold setting add .002
Terry
Exhaust valve clearance .010
Intake valve clearance .008
Stage A, #1 and #6 at TDC, #1 in firing position
Stage B, #1 and #6 at TDC, #6 in firing position
Stage A - Adjust
#1 Both valves
#2 Inlet valve
#3 Exhaust Valve
#4 Inlet valve
#5 Both valves
Stage B - Adjust
#2 Both valves
#3 Inlet valve
#4 Exhaust valve
#5 Inlet valve
#6 Both valves
Follow Ups: