Posted by chriscase on Tuesday, November 27, 2007 at 20:26:57 :
In Reply to: Re: Anyone seen this manifold on.... posted by Matt in MD on Tuesday, November 27, 2007 at 20:18:29 :
But I did one 2bbl in the middle, so three tubes came up vertically to a flange- like their header 'y'.
Plus I brazed some copper tube to the intake runners for heated water.
It was uglier than a home-made pie, but it sure worked good. Upped my HP to the ground from 45 to 65.
Start with intake/exhaust gasket as a pattern for the flange. Add tubing as required.