Posted by chriscase on Sunday, November 18, 2007 at 21:14:43 :
In Reply to: Radiator question posted by Adam on Sunday, November 18, 2007 at 16:31:37 :
The left over radiator support is 22 1/2 inside, and the old radiator measures 23" from the top of the crank hole (umm, I mean front PTO hole) to about where a rectangular top tank would go. The top of the radiator fill spout would be 27 1/2 above the crank hole, and 2 1/2 on center forward from the rear 'face' of the fins.
Lower rad hose is lower right, pointing upwards about 45 deg, and to the right also.
I don't know about shroud fit-up...
Hope this helps, if it fits than a 'stiock' one could be made to fit too.
Follow Ups: