Posted by M Fanoni on Friday, July 27, 2007 at 11:17:24 :
In Reply to: Re: The Nice, can you imagine, posted by Roger normally in La but in CO for a week on Thursday, July 26, 2007 at 23:44:42 :
I actually just replaced the front axle bushings, oil seals, and knuckle bearings on both sides of my front end. I did one side because it was leaking bad and figured I could wait on the other side. After about 20 miles of driving, the right front tire was being worn badly. Jacked it up and I could shake the tire back and forth. If you have a flat spot, some concrete, the right tools, and all the parts you can get them done in 2 or 3 hours each.
Follow Ups: