Posted by Clint Dixon on Sunday, July 22, 2007 at 20:55:58 :
In Reply to: Re: I'm confused posted by achiem37 on Sunday, July 22, 2007 at 19:25:00 :
There is no attachment between the running boards and the front fenders. When all are mounted on the truck, there should be about 1/2" to 3/4" or so clearance between the rear of the fender and the front of the running board.
The bottom edge of the hat channel shaped fender mount should be roughly 9/16" above the rear bottom edge of the fender. This same bracket should be placed roughly 1-3/8" away from the inside surface of the inner lip of the fender (the cab side lip).
These are the dimensions that I get from my WDX. I don't know what kind of tooling Dodge used to locate these brackets. My guess is that they may be a slight variance between different fenders.
I can get photos from fenders mounted on the truck, but it may be better help if someone could take photos of their fenders while removed from a truck.
"FFPW" is my pet peave. Thanks for putting up with me.
Junior
Follow Ups: