Posted by garrett on Wednesday, June 13, 2007 at 11:07:36 :
In Reply to: 4bt installation questions posted by wet coast bruce on Wednesday, June 13, 2007 at 09:56:56 :
Bruce,
I am not an expert, but I am putting 4bt in a carryall as well. I removed the old cast mounts. I want to have my exhaust inside the frame and the pass side mount was going to be an issue. the driver side mount was real close to the clutch slave cylinder, so I removed that as well. I recall thepass side has an extra rivet, in the center. I have a chainfall from and I beam in my garage, so I have installed with the tranny bolted up, but I have a divorced setup.
I'd love to see some pictures. good luck - garrett
Follow Ups: