Re: 318 engine info needed


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Rob Steller on May 08, 2000 at 23:08:36:

In Reply to: 318 engine info needed posted by Dave on May 08, 2000 at 18:39:35:

Dave,

The '67 W-300 probably has the same setup as my '64 did, which means that the starter is a direct drive (also called Folo-Thru) as used on the larger trucks. The small block version is a three bolt mount and the big block is a two bolt mount (go figure) I think that you should have the poly 318 which has a wavy outer edge to the valve covers and equal spacing on the spark plugs. The engine does not define the starter in this application, the bell housing does, and the W-300's were straight rail chassis' like the 400+ series trucks, and shared bell housings and many other components with them, so you can look for the starter for a D-500 with 318-3 engine. I'll try to dig up the NAPA number on the correct starter. Rob


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]