Posted by Jeff Davis on April 25, 2000 at 02:58:28:
In Reply to: Re: Clean gas tank posted by Tom Hammer on April 24, 2000 at 12:24:06:
Depending on the kind of tank you have,it might be easiest to do it your self but as was mentioned above be sure all piping screens and everything is removed first.Get the tank cleaned at a radiator shop,then seal all but one hole to put the sealer in and follow directions on the can but usually you slosh the contents ALL over the inside pour off the extra and let it sit for about 7 days.I dipped the float in the sealer too. and so far so good. My tank is in 60wm300.If you have just a straight tube for a pick up line into the tank and want to reuse it,the best way to clean it is to use a .22cal.cleaning brush and rod,it works real good !!!