Check your timing?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by chriscase on Sunday, April 15, 2007 at 21:44:26 :

In Reply to: SB Mopar Ignition Starting Help Needed - Sloow Cranking posted by Will (in IL) on Sunday, April 15, 2007 at 20:12:53 :

Pull the #1 plug, disconnect the coil, and hold your finger over the hole. bump the engine around til the air blows your finger off the hole. Now turn by hand til the timeing mark line up. That ought to be #1 tdc. Rotor should now point at #1 wire. Leave cap off. hook up wiring. loosen dist and rotate back and forth while listening for the high voltage click. You have just fired #1. Snug up the dist. Re assemble. Start truck. Time with light.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com