Posted by Willy-N on Thursday, April 12, 2007 at 00:38:05 :
In Reply to: Sandblasting posted by John/Florida on Wednesday, April 11, 2007 at 13:33:34 :
I did my Hood, Nose and Fenders with my 3200 psi 3.5 GPM Pressure Washer using a sand injection tip from Northern Tool $60.00 on the wand. You get wet because it blasts water and sand at the same time but it strips paint fast and you can use regular play sand. I found wearing rain gear, rubber boots, full stocking cap and of course googles for the bouncing sand. There is no dust cause it is wet with the water sucking up the sand into the tip and coming out with it. Just need to dry it fast. You also may need to fine sand off any rust flash later. I did these on a hot day and they are not sanded later just sun dried, Did the whole PW this way including the frame and under the dash area. You need a area you don't care if sand gets on the ground and a concrete slab work great to do parts on. Mark H.
Follow Ups: