Posted by Geoff on Wednesday, January 10, 2007 at 20:22:31 :
In Reply to: Help...Poly 318 tappet adjusters/locking threads posted by Dave Jensen on Tuesday, January 09, 2007 at 12:24:51 :
I bought some studs with locking nuts for mine. I think I bought them from Crane. You might check their website. It seems like they are 3/8-16. I know they are a standard thread. The nut does not set flush with the rocker surface but I took a little time and ground a little off the rocker so it would. It has worked fine since I did this. If I find the part numbers I'll let you know. Seems like it was about $35.