Re: Paint Questions

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Paul (in NY) on Friday, August 11, 2006 at 10:24AM :

In Reply to: Paint Questions posted by Dan Lowe on Friday, August 11, 2006 at 9:26AM :

I use PPG Products.
My frame/running gear/underside of fenders is blasted clean with black beauty, then wiped down with PickleX 20, the shot with PPG, MP-170 Epoxy Primer, then shot with PPG, MP-182 surfacer primer, then shot with PPG Hardened MOA Chassis Black. I have never had a problem with a frame or running gear handled in this manner. Its really tough.

The Cab/body/inside is blasted clean, wiped with PickleX 20 then PPG, MP-170 Epoxy Primer, PPG MP-182 Surfacer so I can wet sand. Then I shoot PPG Omni Base Coat, followed by PPG MH161 Clear.

The Black on my trucks is satin. I use PPG 2060 Flex N Flat mixed with some MH 161 to give the satin look as top coat.

I have never had a problem.


Follow Ups:

Post a Followup

Optional Link
Optional Image Link

This board is powered by the Mr. Fong Device from