Posted by mannyc on Friday, July 14, 2006 at 4:46PM :
In Reply to: Brake Woes posted by Michael Fanoni on Friday, July 14, 2006 at 4:23PM :
helitool discs would solve the problem & over the long haul might be less expensive. failing that, ive seen reasonable drums available in the mv mags for m37s. i have about 8 drums im not using on long island. did you have the machine shop turn them on their own hubs? its pretty important that they do it that way. ive also learned that there is precious little meat on the drums and scuffing them with a scotch brite pad is as much machining as i did when i ran drums. low speed stuff were talking about here.
has anyone here had a brake failure or found the drums to crack, warp etc. it always seemed to me that the brakes failed from cylinder leaks and water in the lines and sitting related problems.
Follow Ups: