Posted by mike stone Idaho (aka COTM) on Saturday, June 10, 2006 at 10:13AM :
In Reply to: Prototype Headers need to be fabricated in the chassis posted by chriscase on Friday, June 09, 2006 at 8:49PM :
also you have the problem with warpage of
the flange if you do not have a jig to use
when welding
best bet is to stick with the original exhaust manifolds
the 270 red ram is a sweet little engine that
will work fine the way it is more power stock
than the M37 can take without breaking something.
need to drop it in and see what has to be fabricated for exhaust past the manifolds
might require a cutout on the pass side
of the frame to clear