Posted by Tom Petroff (IL.) on Monday, May 01, 2006 at 7:23PM :
In Reply to: Bed Wood Dimensions for 1950 B2 PW posted by Greg on Monday, May 01, 2006 at 6:42PM :
Greg,
This is from Todd Somers Web page on T-137.com
FINISHED bed wood dimensions for the 1st series bed are as follows: Length of all boards is 95 3/4". There are two boards 10 3/8" wide. There are four boards 7 5/8" wide. All boards are 13/16" thick. The rabbet in the edge of a floor board is 5/8" wide & 3/16" deep.
Also check Joe's Best of forum at top of page. Clint Dixon has a nice write up on bed construction. Try Bruce Horkey's wood products in Minn.? TGP