Re: Dodge Dakota Seats(people who have one installed)


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dwight in Ft.Worth on Monday, March 06, 2006 at 1:23PM :

In Reply to: Dodge Dakota Seats(people who have one installed) posted by Kevin in Ohio on Monday, March 06, 2006 at 9:23AM :

Kevin,

I used a piece of 1/2 inch plate cut out in a shape that conformed to the seat, and drilled a hole for the original adjustment pin to come up through. Then I drilled the holes to mount the seat to the plate and put a spacer under the back seat mount to get the angle I liked and bolted the seat to the plate. The adjustment pin is hallow so I cut the top off so I could put a bolt through and bolt the plate down(tack welded a bolt underneath coming up through the pin and put a nut on top).

This pic may be better. I took some better pics just now but can't get them off the digital camera(waiting on my wife to call and walk me through it so I can get them on imageevent for you). will post those in a little while.

Let me know if you have anymore questions
Dwight(214)803-9068



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com