Re: Drive train noise addendum


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by dave on October 17, 1997 at 11:28:25:

In Reply to: Drive train noise addendum posted by Paul Rauch on October 17, 1997 at 03:52:41:

: The noise only occurs when letting off the gas.
: There is no noise on start up, or, while driving along.

I take it you are in gear and moving. Then you let
off and a growling noise starts. Try this, remove
the rear drive shaft at the rear u-joint, then
remove the cotter pin that locks the pinion bear
nut in side of the yoke,then tighten the pinion
bearing nut, I can't find the torque spec. but get
it tight. If the truck does not have front lockout
hubs the front may have some wear on it to,
I would do the front too. Make sure there is
plenty of grease in the diffs. check the u-joints.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]