Posted by Ed on December 22, 1997 at 16:37:01:
In Reply to: 54 pickup posted by mike duke on December 21, 1997 at 10:34:40:
it depends on what he did. kits are available
for a nice installation, if he used one of those it should make for a nice drive. sence there is alot of room between the frame rails you have alot of options. make sure the radiator can handle the cooling and you have enough clearance from the firewall..... a turbo 350 or 400 should be able to fit behind it. you will have to get the drive shaft cut. i've also seen ford econline rearends
bolt right up to the rear leafs if you want to put
a higher ratio in . hope i was able to help..
good luck!!......Ed